 |
Clamping Toggles
a. Features: Brand-new updated toggles have a larger force area for a better effect of clamping force and speed.
|
|
Injection Unit Features: The single-cylinder injection system, commonly used in Europe and Japan, connects the oil cylinder to the plasticizing motor and injection tail platen. Injection requires only one push of the screw. (Note: Not all single-cylinder systems have this design) |
|
 |
Transmission Structure Features: The cutting-edge transmission structure utilizes the design that separates the plasticizing shaft and injection piston rod.
|
– OTHER SYSTEMS –
| Nozzle Cover | Back Pressure | |
 |
 |
|
| A nozzle cover is equipped to protect workers from injuries caused by accidental hot melt splashes. | Digital control of proportional back pressure and individual oil circuit allow convenient, quick, and accurate adjustment of the plasticizing back pressure for better control of the density of melt, simplifying technical data statistics and archiving. | |
| Linear Guides | Integrated Advantages | |
 |
 |
|
| The injection table adopts linear ball rails and an integral support with higher rigidity, providing minimal resistance of smooth mechanical motion to achieve high precision and durability. | Integrate the design advantages of machinery, oil circuits, and electric control for fast mold opening and clamping. The stable stop position of mold opening minimizes impact, and mold clamping is equipped with sensitive low-voltage protection. | |
| Rigorous Testing | Internal Gear Pump | |
 |
 |
|
| Melt density and injection precision are designed based on rigorous analysis and testing, ensuring the weight repeatability of plastic products. | Equipped with an imported internal gear pump, this servo pump provides stable output pressure and low internal leakage so that it can withstand a maximum continuous working pressure of up to 25MPa, making it highly advantageous for precision injection, low-speed and high-pressure molding, and other applications. | |
| Electrical Components | 100% Inspection | |
 |
 |
|
| High-quality imported electrical components (Schneider/TE) are combined with interference-resistant circuits to ensure a long lifespan even with frequent switching and connection. | 100% inspection tests the clamping force and parallelism, which shows our confidence in the machining precision and assemble quality of the mechanical parts. Adequate clamping force reduces tension on tie bars and ensures uniform force distribution. |
GS High-Performance Series Injection Molding Machine Parameter
| Model | Unit | GS180 | ||||||||
| International Standard | 533/180 | 726/180 | 1052/180 | |||||||
| Injection Table Model | D530 | D720 | D1050 | |||||||
| Screw Number | A | B | C | A | B | C | A | B | C | |
| Screw Diameter | mm | 36 | 42 | 46 | 42 | 46 | 52 | 46 | 52 | 60 |
| Screw L/D Ratio | L:D | 22 | 22 | 20.1 | 22 | 22 | 19.5 | 22 | 22 | 19.1 |
| Injection Pressure | kg/c㎡ | 2647 | 1944 | 1621 | 2383 | 1987 | 1555 | 2533 | 1982 | 1489 |
| Injection Weight (PS) | g | 181 | 247 | 296 | 274 | 329 | 420 | 374 | 478 | 636 |
| oz | 6.3 | 8.6 | 10.4 | 9.6 | 11.5 | 14.7 | 13.1 | 16.7 | 22.3 | |
| Injection Speed | mm/s | 150 | 150 | 150 | 122 | 122 | 122 | 96 | 96 | 96 |
| Maximum Injection Rate | cc / sec | 153 | 208 | 249 | 170 | 203 | 260 | 160 | 204 | 272 |
| Theoretical Injection Volume | cc | 201 | 274 | 329 | 305 | 365 | 467 | 415 | 531 | 707 |
| Injection Stroke | mm | 198 | 198 | 198 | 220 | 220 | 220 | 250 | 250 | 250 |
| Plasticizing Capacity (PS) | kg/h | 86 | 131 | 162 | 98 | 122 | 171 | 93 | 130 | 189 |
| Plasticizing Capacity (PS) | g/sec | 24 | 36.3 | 45 | 27.3 | 33.9 | 47.5 | 25.8 | 36.2 | 52.4 |
| Max Screw Speed | r.p.m | 372 | 372 | 372 | 290 | 290 | 290 | 217 | 217 | 217 |
| Nozzle Contact Force | Tons | 4.4 | 4.4 | 4.4 | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 |
| Clamping System Category | Five point machine hinge | |||||||||
| Clamping Force | Tons | 180 | 180 | 180 | ||||||
| Clamping Stroke | mm | 455 | 455 | 455 | ||||||
| Max Platen Opening | mm | 975 | 975 | 975 | ||||||
| Min-Max Mold Thickness | mm | 180-520 | 180-520 | 180-520 | ||||||
| Dist. between Tiebars (Horizontal*Vertical) | mm | 470×470 | 470×470 | 470×470 | ||||||
| Platen Dimension (Horizontal*Vertical) | mm | 700×700 | 700×700 | 700×700 | ||||||
| Diameter of Mold Locating Hole | mm | Φ125H8 | Φ125H8 | Φ125H8 | ||||||
| Ejector Force | ton | 7.7 | 7.7 | 7.7 | ||||||
| Ejector Stroke | mm | 140 | 140 | 140 | ||||||
| Ejector Pin Quantity | pcs | 5 | 5 | 5 | ||||||
| Other | ||||||||||
| System Pressure | kg/c㎡ | 175 | 175 | 175 | ||||||
| Oil Pump Motor | kW | 32 | 32 | 32 | ||||||
| Heating Power | kW | 8.8 | 10.9 | 13.6 | ||||||
| Temperature Control Zone | section | 4+1 | 4+1 | 4+1 | ||||||
| Oil Tank Capacity | L | 347 | 347 | 347 | ||||||
| Machine Weight | Tons | 5.8 | 5.9 | 6.1 | ||||||
| Overall Dimension(LxWxH) | mxmxm | 5.41×1.3×1.98 | 5.56×1.3×1.98 | 5.78×1.3×1.98 | ||||||
